Safety Chip Shields with Magnetic-Mount Flexible Arm

$174.23$369.64 /

Product Description

Safety Chip Shields with Magnetic-Mount Flexible Arm –

The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation.

The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield sizes are available up to 12-inch x 12-inch; please call our sales department at 1-800-922-7533 for more information.

These flexible-arm safety chip shields are made of high-quality, heavy-duty 3/4-inch-diameter spring steel covered with vinyl to protect from grease, oil, and contaminants that could weaken their holding power. They offer virtually unlimited adjustment possibilities and long-term holding power.

The magnetic base consists of a 3-inch-diameter magnet with 100-lb holding force.

If an adequate flat, smooth, ferrous mounting surface is not available, an optional steel mounting plate (Part No. FKT-1106) can be permanently attached to the machine to hold the flexible-arm safety chip shields magnetic mount base.

Copolymer Lock-Arm Shields No Longer Available

These part numbers are no longer available. Please select Shield Type and Arm Length above to order similar part.

KYL283 – 6-inch x 8-inch Flat Shield and 12-inch Arm With Magnetic Base
KYL284 – 6-inch x 8-inch Flat Shield and 18-inch Arm With Magnetic Base
KYL285 – 6-inch x 8-inch Flat Shield and 24-inch Arm With Magnetic Base
KYL289 – 10-inch x 12-inch Flat Shield and 12-inch Arm With Magnetic Base
KYL290 – 10-inch x 12-inch Flat Shield and 18-inch Arm With Magnetic Base
KYL291 – 10-inch x 12-inch Flat Shield and 24-inch Arm With Magnetic Base
KYL292 – 30-degree Angle (7-inch Front) 12-inch Arm With Magnetic Base
KYL293 – 30-degree Angle (7-inch Front) 18-inch Arm With Magnetic Base
KYL294 – 30-degree Angle (7-inch Front) 24-inch Arm With Magnetic Base
KYL295 – 8-inch x 10-inch Concave Shield and 12-inch Arm With Magnetic Base
KYL296 – 8-inch x 10-inch Concave Shield and 18-inch Arm With Magnetic Base
KYL297 – 8-inch x 10-inch Concave Shield and 24-inch Arm With Magnetic Base

OSHA 1910.212 – General Safety Requirements / ANSI B11.8 – Manual Drilling Machines / ANSI B11.23 – CNC Drilling Machines

CREATING A SAFER WORK ENVIRONMENT

Check out the patent-pending PROTECTOR Series Shields offering the highest level of safety on the market!


FEATURES & BENEFITS

    ROBUST CONSTRUCTION

PROTECTOR Series Shields are constructed of 14-gauge powder-coated steel and 3/16” shock-proof and oil-resistant polycarbonate, creating an extremely tough, rigid and durable safety shield to protect operators from flying debris, lubricants, coolants and swarf.

    MODULAR DESIGN

PROTECTOR Series Shields are modular in design so that shield shape, size, mount, arm, offset, lighting, interlocking and safety monitoring can be configured to provide the best solution for even the toughest machine guarding challenge.

    WORKSPACE SAFETY LIGHTING

PROTECTOR Series Shields can include color-changing LED lighting nested into the frame of the shield to illuminate the work area during machine operation. The LED light strip is integrated into the shield frame and each strip packs 262 Lumens of light per linear foot.

    SAFETY INTERLOCKS & MONITORING

PROTECTOR Series Shields can be upgraded with a safety-rated interlock switch or switches, dependent upon application. Interlocking shields exceed OSHA CFR 1910 regulations and ANSI B11 Series standards, and are considered a best safety practice.

    MADE IN THE USA

PROTECTOR Series Shields are manufactured by Rockford Systems LLC in Rockford, Illinois, USA. All shields are shipped within 2-3 weeks.

LEARN MORE

PROTECTOR Series Shields Quote Request

  • This field is for validation purposes and should be left unchanged.

You may also like…