Electrically Interlocked Drill Press Shield – Flat Front with Angled Sides

$697.00 /

This is a non-stock item and may incur an extended delivery time.

Product Description

Goes beyond OSHA and ANSI safety requirements

These electrically interlocked drill press shields are ideal for small to medium sized drill presses and similar machines, such as mills. When the heavy-duty shield is swung out of position, the positive contacts on the microswitch open, sending a stop signal to the machine control. Each shield is furnished with an IP 67 rated safety microswitch. All electrically interlocked drill press shields consist of a high impact-resistant, transparent polycarbonate flat front with angled side shield that provides operator protection from flying chips and coolant. The adjustable shield clamps to a steel support rod that extends from 4.53″ to 8.46″ and operates the shield safety microswitch. When the shield is swung out of position, the positive contacts on the microswitch open, sending a stop signal to the machine control. The shield is furnished with an IP 67 rated safety microswitch.

Attributes and Properties

Weight 7 lbs
Dimensions 7.87 × 4.33 × 7.08 in
Dimensions

Arm Length = 4.53”-8.46” (115-215 mm), A = 7.87” (200 mm), B = 7.08” (180 mm), C = 4.33” (110 mm)

You may also like…