Rockford System Introduces Emergency-Stop Assembly

Emergency-Stop Assembly Prevents Injuries to Machine Operators

Rockford Systems, LLC., a premier provider of machine safeguarding products and services, has introduced a new Cable and emergency-stop assembly featuring a unique cam operation for faster positive stopping of metal working machines, yet is immune to nuisance tripping due to vibrations. The new assembly (CLM510) is also effective as an awareness barrier on the backside of shears and press brakes, as well as around the perimeter of other hazardous areas for reducing risk.

Emergency-Stop Assembly

Simple to install on most standard machinery, the e-stop assembly includes a push-button switch with red mushroom-head button, indicator light and bulb, 21′ of red PVC-covered steel cable, and cable tension kit. Because the cable is interlocked with the switch, it will actuate an emergency stop if pulled or removed from a hook, leaving the machine inoperable. Machinery cannot restart until the hazard has been corrected and the switch is reset.

Unlike similar e-stop devices, the assembly contact mechanism employs a cam operation for faster and safer stopping, while also providing a failure to the safe condition if the cable goes slack or is cut. In the event the cable is pulled, the contacts are opened resulting in the isolation of machine power and the engagement of the latch. The switch is reset by turning the blue reset dial from the off position to the run position.

The Cable and Push-Button E-Stop Assembly (CML510) is immediately available for $784.00 (USD) by calling 1-800-922-7533 or by ordering online

About Rockford Systems, LLC.

Headquartered in Rockford, Illinois, Rockford Systems, LLC delivers innovative machine safeguarding solutions for organizations working with industrial machinery. As a trusted adviser since 1971, Rockford Systems helps organizations interpret and apply complex Occupational Safety and Health Administration (OSHA) regulations and American National Standards Institute (ANSI) machine safety standards for a broad array of industrial applications. In addition, Rockford Systems provides complete Safety Life-Cycle Management Solutions, including on-site surveys, customized engineering integration, over 10,000 safeguarding products, expert installation services, training and technical support, and ongoing compliance validation. Rockford Systems has improved the profitability of many of North America’s largest companies by increasing compliance, reducing worker risk, enhancing productivity and decreasing costs.

Media Contact

Carrie Halle
Rockford Systems, LLC.
800-922-7533
carrie.halle@rockfordsystems.com

Dan O’Connell
O’Connell Communications
708-482-0212
dan@oconnellpr.com