Safeguarding Devices Keep Machine Operators Out of a Pinch

Pinching your finger in a door can be painful but certainly not life-threatening. But what happens when it’s not just your finger?

Pinching your finger in a door can be painful but certainly not life-threatening. Pinch point injuries involving industrial machinery are another story, one that rarely has a happy ending.

A pinch point is created when two objects come together and there is a possibility that a person could be caught or injured when coming in contact with that area. If any part of the worker’s body, typically hands or fingers, occupies that space during the pinching movement, there is a high probability of injuries such as fractures, amputations, contusions, lacerations or even death. Machinery parts move at high rates of speed, making it difficult for an individual to pull free once caught.

Pinch-point injuries often occur as a result of workers who are not properly trained or don’t realize the dangers of machinery, or who take shortcuts to get the work done more quickly but end up injuring themselves instead.

Pinching your finger in a door can be painful but certainly not life-threatening. Pinch point injuries involving industrial machinery are another story, one that rarely has a happy ending.

A pinch point is created when two objects come together and there is a possibility that a person could be caught or injured when coming in contact with that area. If any part of the worker’s body, typically hands or fingers, occupies that space during the pinching movement, there is a high probability of injuries such as fractures, amputations, contusions, lacerations or even death. Machinery parts move at high rates of speed, making it difficult for an individual to pull free once caught.

Pinch-point injuries often occur as a result of workers who are not properly trained or don’t realize the dangers of machinery, or who take shortcuts to get the work done more quickly but end up injuring themselves instead.

Depending on the material thicknesses being spot welded, a strong weld joint requires a forging pressure ranging from several hundred to several thousand pounds.

For example, a welding machine with a 1/4-inch electrode face set with 600 pounds of electrode force will develop 12,230 pounds per square inch. This can cause major crushing damage to the operator’s finger if caught at this pinch point.

Light curtains are not one of the solutions we will be looking at. Light curtains are rarely practical with hand-fed welding or riveting since the user’s hands will normally be in the point of operation. Also, light curtains cannot usually handle parts that have flanges that are in the same area as the operator’s hands.

GOOD: Drop-Probe Devices

Drop-probes provide economical, simple to understand and use, and reliable protection for the operator. Drop-probe devices function by allowing a sensing probe to drop by gravity around the point-of-operation hazard of a riveter or welder prior to each intended machine cycle. If the sensing probe encounters the operator’s fingers and fails to drop to a preset position, the machine cycle cannot be initiated until the obstruction is cleared and the cycle re-initiated.

However, if there are no obstructions to prevent the sensing probe from dropping, then the control unit will allow the machine to cycle when the probe reaches the preset position. Users can fabricate a custom “drop ring” to fit narrowly around the point of operation thus allowing the operator to hold the workpiece close for joining. Additional materials, such as acrylic or polycarbonate clear plastic pieces or tube-type materials can be added to the probe to provide adequate protection.

On machines that are mechanically operated, an air cylinder or electric solenoid may have to be added to the operating linkage to trip the machine. On machines that are hydraulically or pneumatically operated, the drop-probe control can usually be interfaced with the existing control system.

One drawback of “drop probe” devices is that they can only keep a machine from starting, and do not stop a machine that is already in operation. For this reason, they must only be used on machines such as small riveters that perform a single, rapid movement each time they’re activated. Also, this type of system is not usable where the parts being welded are not flat in the area of the weld.

BETTER: Adjustable Stroke Drop-Probes

Identical in most ways to standard drop-probes, adjustable models offer an externally adjustable stroke, via a clamp collar, typically from 0 to 4.0 inches to accommodate any fixture, tooling, or changes in the profile of the workpieces.

BEST: Continuity Monitoring

Available from only one manufacturer, Unitrol, this unique and highly effective system measures electrical continuity between the two electrodes to verify they are actually touching the part to be welded. If anything, such as the operator’s finger, blocks the movement of the electrode, the system will not detect continuity. In other words, it must detect metal between the copper tips rather than a finger. The continuity signal is picked up from points on the welding transformer secondary pads, eliminating the need for wire connections at the electrodes.

In operation, the electrodes are closed under low force, a process that is accomplished by a modified pneumatic valve system. A group of precision pressure regulators in a pad-locked box provides the pressure needed to counterbalance heavy welding rams to less than 50 pounds of force at the electrodes. If continuity is detected before a maximum time has been reached, the electrodes are brought to full welding force.

However, if continuity is not detected before that time, the electrodes are retracted and will not come forward until the initiation switch has been released and closed again.

Available from Rockford Systems, Unitrol’s safety system—known as the Soft Touch—does not have any operator-set components and does not require any adjustment when new setups are made. It cannot be overridden and is in place at all times that the machine is under power.

Because the Soft-Touch is a fully passive process, it can be used as the primary pinch point safety system for a spot, seam, projection, and transgun welders and other small machines including riveters, eyeletters, stakers, and crimpers, to name a few.

Other practical steps to safeguard operations are:

  • Install a pinch-point warning sign on the machine
  • Train operators properly regarding the importance of keeping their hands away from movement
  • Make sure the foot switch used for machine initiation has a top and side shroud installed to prevent accidental activation
  • Require everyone in the welding department to wear safety glasses with side shields at all times
  • If possible, have the operator hold the parts being welded with both hands while the assembly is manipulated in the throat of the machine to access all weld locations

Conclusion

Since pinch-points are the root of such a large number of hand injuries, it’s best to install viable pinch-point safety on two machines where these injuries commonly occur: resistance welders and riveters.