On/Off Magnet-Base Shields |
|||||||||
 
|
|||||||||
|
These versatile On/Off magnet-base shields can be used on lathes, drill presses, milling machines, grinders, or any equipment that has a flat, ferrous mounting surface. The heavy-duty magnetic base is 2 3/4" square with a V-groove and measures 3" high. The 200-lb holding force keeps the shield in place when the magnet is on. If an adequate flat, smooth, ferrous mounting surface is not available, an optional steel mounting plate (Part No. FKT-1106; see below) can be permanently attached to the machine to hold the magnetic base. There are two types of flexible arms available for attaching shields: flexible copolymer lock-arms, and flexible spring-steel arms. Both types of arms are available in standard lengths of 12", 18", and 24". The transparent portion of these shields is constructed of high-impact-resistant, 3/16"-thick clear polycarbonate. The shield places a barrier between an operator and the flying chips (swarf), sparks, and splashing coolant generated at the point of operation. A variety of flat, angled, and concave shields are available. |
|||||||||
|
Ordering Information
|
|||||||||
|
|||||||||
|
Flexible Spring-Steel Arm Shield Assemblies
|
|||||||||
|
|||||||||
|
Replacement Shields Only
|
|||||||||
Replacement Flexible Copolymer Lock-Arms |
|||||||||
|
|
|||||||||
|
Replacement Flexible Spring-Steel Arm or Replacement Knob Only
|
|||||||||
|
|||||||||
|
|||||||||
|
|||||||||
 |
|||||||||
|
The products and photos on this site are carefully checked for accuracy; however some cosmetic differences may occur.
