|
Large Steel Lathe Chuck Shields |
||||||||||
|
||||||||||
|
These fabricated 18-gauge steel chuck shields with reinforced sides can be used on large lathes that have chucks up to 47" in diameter. They are double hinged for access to the chuck, workpiece, and tool. The front hinged portion can be swung up for workpiece changes, and the entire shield can be hinged back for changing chucks. Each shield is furnished with a mounting rod, plate and support bar for mounting the shield to the face of the headstock. The rear mounting bracket hinges the entire shield, and the side mounting bracket supports the shield in its normal operating position. | ||||||||||
|
||||||||||
Ordering Information
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
||||||||||||||