PFR 01/500
PFR 02/730
The products and photos on this site are carefully checked for accuracy; however some cosmetic differences may occur.
Electrically Interlocked Heavy-Duty Milling Machine Shields |
|||||||||
Goes beyond OSHA and ANSI safety requirements— |
|||||||||
PFR 01/300 These are electrically interlocked heavy-duty shields for vertical milling machines with two (2) safety microswitch locations. When the shield is swung out of position at either safety microswitch location, the positive contacts on the microswitch open, sending a stop signal to the machine control. The safety microswitch electrical wires are furnished with a protective sheath and connect to the safety circuit of the machine that switches off the control to the movement of the spindle. All safety microswitches are mounted in an enclosed housing with an enclosure rating of IP67. These have a thermo-formed shield made from high impact-resistant, transparent polycarbonate that provides operator protection from flying chips and coolant. The shields, in tubular-steel frames, clamp to a support rod that rotates 180° and operates the shield safety microswitch. Tubular-steel arms provide additional adjustability at the joint and steel base. The steel base, which houses a second safety microswitch, can be laterally adjusted from .59" to 7.87" (15 to 200 mm). These electrically interlocked milling machine shields are available in different sizes and are available as left-mount or right-mount models. Because the shield, arms, and base are adjustable, the shield can be positioned for maximum protection during operation and can be swung out of the way for easy access to the workpiece and tooling.
|
|||||||||
|
PFR 02/625 These are electrically interlocked heavy-duty shields for vertical milling machines with two (2) safety microswitch locations. When the shield is swung out of position at either safety microswitch location, the positive contacts on the microswitch open, sending a stop signal to the machine control. The safety microswitch electrical wires are furnished with a protective sheath and connect to the safety circuit of the machine that switches off the control to the movement of the spindle. All safety microswitches are mounted in an enclosed housing with an enclosure rating of IP67. These have a thermo-formed shield made from high impact-resistant, transparent polycarbonate that provides operator protection from flying chips and coolant. The shield has an aluminum upper frame and clamps to a support rod that rotates 180° and operates the shield safety microswitch. Tubular-steel arms provide additional adjustability at the joint and steel base. The steel base, which houses a second safety microswitch, can be laterally adjusted from .59" to 7.87" (15 to 200 mm). These electrically interlocked milling machine shields are available in different sizes and are available as left-mount or right-mount models. Because the shield, arms, and base are adjustable, the shield can be positioned for maximum protection during operation and can be swung out of the way for easy access to the workpiece and tooling. |
|||||||||
  |
|||||||||
|
|||||||||
Ordering Information—Left-Mount Models
|
|||||||||
Ordering Information—Right-Mount Models
|
|||||||||
