Electrically Interlocked Heavy-Duty Drill Shields |
|||||||||
Goes beyond OSHA and ANSI safety requirements— |
|||||||||
PTR 03/140 Shield The shield consists of a high impact-resistant, transparent polycarbonate semi-octagonal front shield that provides operator protection from flying chips and coolant. The adjustable shield clamps to a steel support rod that rotates 180° and operates the shield safety microswitch. The shield mounts to the left side of the machine using a steel mounting bracket. |
|||||||||
|
These electrically interlocked heavy-duty shields are ideal for larger drills and radial drills. When the shields are swung out of position, the positive contacts on the microswitch open, sending a stop signal to the machine control. The safety microswitch electrical wires are furnished with a protective cover and connect to the safety circuit of the machine that switches off the control to the movement of the spindle. All safety microswitches are mounted in an enclosed housing with an enclosure rating of IP 67. The shields consist of a high impact-resistant, transparent polycarbonate semi-octagonal front shield that provides operator protection from flying chips and coolant. The adjustable shields clamp to a steel support rod that rotates 180° and operates the shield safety microswitch. The shields mount to the left side of the machine using a steel mounting bracket. These electrically interlocked shields are available in different sizes and provide double vertical adjustment. The PTR 20-series shields have a tubular steel telescopic shield support rod.
|
|||||||||
  |
|||||||||
|
|||||||||
Ordering Information
|
|||||||||
This electrically interlocked heavy-duty shield is ideal for small to medium size drills and similar machines. When the shield is swung out of position, the positive contacts on the microswitch open, sending a stop signal to the machine control. The safety microswitch electrical wires are furnished with a protective cover and connect to the safety circuit of the machine that switches off the control to the movement of the spindle. All safety microswitches are mounted in an enclosed housing with an enclosure rating of IP 67.
PTR 02/130
