Band Saw Shields

These high-quality, flexible-arm band saw shields place a barrier between an operator and flying debris generated at the point of operation. The heavy-duty flexible arms are made of spring steel and offer unlimited adjustment possibilities. The transparent, L-shaped portion of the band saw shield is constructed of high-impact-resistant, 3/16"-thick clear polycarbonate.

The direct-mount base of the band saw shield can be fastened directly to the band saw using two 1/4" fasteners (included). Three different sized direct-mount, flexible arms are available—12", 18", and 24".

You may also want to see our Sensing-Saf-Start® Package.

Ordering Information

Part #	Description	Price
KYL-189	FLEXIBLE SPRING-STEEL 12" DIRECT-MOUNT ARM WITH 6" H X 6" W L-SHAPED SHIELD (4" D)	$110.00
KYL-190	FLEXIBLE SPRING-STEEL 18" DIRECT-MOUNT ARM WITH 6" H X 6" W L-SHAPED SHIELD (4" D)	$116.00
KYL-191	FLEXIBLE SPRING-STEEL 24" DIRECT-MOUNT ARM WITH 6" H X 6" W L-SHAPED SHIELD (4" D)	$121.00

Replacement Parts

Ordering Info

Part #	Description	Price
KYF-036	12" FLEXIBLE SPRING-STEEL ARM W/DIRECT-MOUNT BASE	$60.00
KYF-037	18" FLEXIBLE SPRING-STEEL ARM W/DIRECT-MOUNT BASE	$60.00
KYF-057	24" FLEXIBLE SPRING-STEEL ARM W/DIRECT-MOUNT BASE	$70.00
KYL-175	REPLACEMENT SHIELD ONLY 6" H X 6" W x 4" D L-SHAPED	$55.00
FKT-083	T-HANDLE KNOB	$4.00

Recommended

This Sensing-Saf-Start® package (SAFS-200) is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the Saf-Start® package will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset button on the Saf-Start® pushed.

The package includes a 120-V AC Sensing-Saf-Start® with a 20" cord for the machine end and an 8' cord with molded plug on the power end, plus an E-stop in a Nema 4 polycarbonate enclosure. The Saf-Start® complies with OSHA requirements, NFPA 79 electrical standard, and CSA standards.

This one-box SAFS-300 is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the SAFS-300 will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset button pushed.

The SAFS-300 is housed in a Nema 4 polycarbonate enclosure and includes a reset button and E-stop. The Saf-Start® complies with OSHA requirements, NFPA 79 electrical standard, and CSA standards.

Ordering Info

Part #		Description		Price		Qty.
SAFS-200		COMBINATION SENSING-SAF-START® AND E-STOP PACKAGE		$295.00
SAFS-300		ONE-BOX SENSING-SAF-START® WITH RESET BUTTON AND E-STOP		$235.00