Band Saw Shields |
  These high-quality band saw shields place a barrier between an operator and flying debris generated at the point of operation. The transparent, L-shaped portion of the band saw shield is constructed of high-impact-resistant, 3/16"- thick clear poly-carbonate. There are two types of flexible arms available for attaching the shield:
• Flexible copolymer lock-arms—available in standard lengths of 12" and 18"
• Flexible spring-steel arms—available in
standard lengths of 12", 18", and 24"
The band saw shield assemblies are offered with a direct-mount base that is attached directly to the band saw. Mounting hardware is included.
You may also want to see our Sensing-Saf-Start® Package.
|
Flexible Copolymer Lock-Arm Shield Assemblies
| Part # |
|
Description |
|
Price |
|
Qty. |
|
|
|
Flexible Spring-Steel Arm Shield Assemblies
| Part # |
|
Description |
|
Price |
|
Qty. |
|
|
|
|
Replacement Parts for Flexible Copolymer Lock-Arm Shield Assemblies
|
| Part # |
|
Description |
|
Price |
|
Qty. |
|
|
|
Replacement Parts for Flexible Spring-Steel Arm Shield Assemblies
|
| Part # |
|
Description |
|
Price |
|
Qty. |
|
|
|
|
Recommended
 |
This Sensing-Saf-Start® package (SAFS-200) is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the Saf-Start® package will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset button on the Saf-Start® pushed.
The package includes a 120-V AC Sensing-Saf-Start® with a 20" cord for the machine end and an 8' cord with molded plug on the power end, plus an E-stop in a Nema 4 polycarbonate enclosure. The Saf-Start® complies with OSHA requirements, NFPA 79 electrical standard, and CSA standards. |
 |
This one-box SAFS-300 is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the SAFS-300 will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset button pushed.
The SAFS-300 is housed in a Nema 4 polycarbonate enclosure and includes a reset button and E-stop. The Saf-Start® complies with OSHA requirements, NFPA 79 electrical standard, and CSA standards.
|
|
| Part # |
|
Description |
|
Price |
|
Qty. |
|
|
|
