Hand Tools

VACUUM LIFTERS

These vacuum lifters grip and hold oiled or dry sheet metal, glass, plastic, steel, plexiglass, polished stone, fiberglass, auto panels, or any other material with a smooth surface.

Little-Grabber Lifter

These one-finger lifters are ideal for light objects or raising corners for better grip. Always handy and ready for use, yet leaves one hand free for other work. It has specially designed release tabs. Made from tough rubber compound. Lifts about 7 pounds.

Part No. KMK-007 2 1/8" diameter (1" finger loop)

Part No. KMK-056 2 5/8" diameter (1 1/4" finger loop for use with gloves)

Knuckle-Saver Lifter

This two-finger grip and larger cup provide extra lifting capacity. Its larger diameter makes this lifter ideal for greater loads. Breaks oil adhesions easily. It also has specially designed release tabs. Lifts about 15 pounds.

Part No. KMK-008 3 1/4" diameter

Super-Grabber Lifter

This four-finger grip and larger cup provide extra lifting capacity. Its larger diameter makes this lifter ideal for greater loads. Breaks oil adhesions easily. It also has specially designed release tabs. Lifts about 15 pounds.

Part No. KMK-055 4 3/4" diameter

Medium-Duty Lifter

Sturdy construction and a fast-action metal release valve offer safe, quick handling of smooth surface materials. Full-hand grip for extra strength gives operator extra freedom of movement. Lifts about 25 pounds.

Part No. KMK-009 3 1/4" diameter

Part No. KMK-013 Replacement cup only - 3 1/4" diameter

Medium-Duty Grabber Lifter

This combination grabber and lifter combines the flexibility of a grabber with the holding strength of a lifter. Just lift the tipped edge to release the vacuum. Lifts about 30 pounds.

Part No. KMK-040 3 1/4" diameter

Heavy-Duty Sheet Metal Lifter

These lifters have powerful suction to lift heavier loads. A handy trigger-valve release disengages the vacuum lifter instantly and safely. This saves wear and tear on gloves and hands. These lifters are generally used for loading, unloading, piling, and shifting sheet metal from trucks, stock, etc. The 3" cup lifts about 30 pounds; the 4" cup about 50 pounds; the 5" cup about 80 pounds.

Part No. KMK-047 single cup, 3" diameter

Part No. KMK-043 single cup, 4" diameter

Part No. KMK-010 single cup, 5" diameter

Double-Cup Sheet Metal Lifter

These lifters have a convenient handle for one- or two-handed lifting. Positive grip increases the operator's working capacity. Dual trigger valves disengage the lifter from material. The 3" cups lift about 65 pounds; the 4" cups about 100 pounds; and the 5" cups about 150 pounds.

Part No. KMK-054 2 cups, 3" diameter each

Part No. KMK-044 2 cups, 4" diameter each

Part No. KMK-011 2 cups, 5" diameter each

Replacement Cups:

Part No. KMK-057 3" diameter single cup

Part No. KMK-031 4" diameter single cup

Part No. KMK-014 5" diameter single cup

Two-Man Vacuum Lifter

These lifters have extra capacity for extra safety. Ideal for moving heavy gauge metal, marble slab, heavy plate glass, and plastic sheets. The 4" cups lift about 110 pounds; the 5" cups about 160 pounds.

Part No. KMK-041 2 cups, 4" diameter each

Part No. KMK-042 2 cups, 5" diameter each

Double-Cup Verti-Lift

Powerful suction cups are used to lift and move loads from the floor without having to bend over. It has a handy trigger-valve release to disengage the vacuum lifter instantly and safely. These hand-operated vacuum lifters are used for repeated lifting and moving of non-porous materials on the ground level. The vertical handle is 32" and the total length is 37". The 4" cups lift about 100 pounds; the 5" cups about 150 pounds.

Part No. KMK-045 4" cup diameter

Part No. KMK-031 Replacement cup (4")

Part No. KMK-046 5" cup diameter

Part No. KMK-014 Replacement cup (5")

Part No. KMK-041 2 cups, 4" diameter each

Part No. KMK-042 2 cups, 5" diameter each

These lifters can be used to place and remove material in and from the machine. These tools are not to be used as a point-of-operation safeguard, but can be used to help keep the operator's hands out of the point of operation when loading parts.

These lifters have strengthened steel rods and oil-resistant flexible vacuum cups. They are ideal for handling plastic, metal, glass, and any other material that has a smooth, non-porous surface. There are three types of lifters to choose from. The single-cup lifter is available in three cup sizes. The double-cup lifter is available in one cup size. The straight-handle lifter has a handle attached to the top of the vacuum cup and provides the user with extra reach. All three lifters incorporate an instant release button. The 2 1/8" cup lifts about 7 pounds, the 3 1/4" cup lifts about 15 pounds, and the 4" cup lifts about 25 pounds. The double-cup lifters lift about 15 pounds.

Replacement Cups:

Part No. KMK-012 2 1/8" diameter

Part No. KMK-013 3 1/4" diameter

Part No. KMK-031 4" diameter

Ordering Information

MAGNETIC TOOLS

Part No. CYF-431 Pick-up capacity up to 3 pounds with release handle. Single magnet - 12" length

Part No. CYF-432 Pick-up capacity up to 7 pounds with release handle. Double magnet - 14" length

Part No. CYF-602 Pick-up capacity up to 3 pounds with twist release. Single magnet - 12" length

Part No. CYF-603 Pick-up capacity up to 7 pounds with twist release. Double magnet - 14" length

Part No. CYF-604 Pick-up capacity up to 4 ounces with low profile. Single magnet - 15" length

Part No. CYF-605 Pick-up capacity up to 8 ounces with low profile. Double magnet - 15" length

Ordering Information

HAND FEEDING AND RETRIEVAL TOOLS
(Pliers, Positioners, Tongs, and Vacu-Tongs)

A wide variety of hand-feeding tools are available. They are used to keep hands out of the point of operation while feeding or removing parts from the machine. Although they are not considered to be guards or devices by themselves, hand tools do offer additional protection. In addition to numerous pliers and tongs, hand tools are available with either suction cups or magnetic pick-ups. Most of the tools are constructed of soft alloy materials, engineered to easily crush if caught between dies or parts of the machine. Many of today's hand tools are designed with ergonomics in mind. This provides the operator with maximum comfort and minimum fatigue.

Part No. CYF-550
Lightweight duckbill spring-opened pliers.
Jaw Length: 2 1/2" Total Length: 7" Weight: 2 oz.

Part No. CYF-551
Pliers with long tapered jaws—ideal for small parts.
Jaw Length: 3" Total Length: 7 3/4" Weight: 3 oz.

Part No. CYF-552
Pliers with a right-angle hook nose for gripping
Jaw Length: 2 1/2" Total Length: 7" Weight: 2 oz.

Part No. CYF-559
Small, heavy-duty stubby pliers with good gripping capability.
Jaw Length: 1 3/4" Total Length: 6 1/8" Weight: 3 1/2 oz.

Part No. CYF-560
Medium-duty, spring-opened pliers with long nose.
Jaw Length: 4 1/2" Total Length: 9 3/4" Weight: 5 1/2 oz.

Part No. CYF-567
Heavy-duty straight-handled tongs for two-handed use.
Jaw Length: 3 1/8" Total Length: 11 1/2" Weight: 5 oz.

Part No. CYF-568
Medium-duty tongs with finger loops on both handles.
Jaw Length: 3" Total Length: 10 1/2" Weight: 7 oz.

Part No. CYF-569
Popular ergonomic tongs with 30 degrees bend and thumb loop.
Jaw Length: 2 3/4" Total Length: 10 1/4" Weight: 7 oz.

Part No. CYF-553
1 1/2" wide duckbill for rigid support.
Jaw Length: 3" Total Length: 7 1/8" Weight: 3 oz.

Part No. CYF-554
Heavy-duty pliers similar to CYF-552.
Jaw Length: 2 3/4" Total Length: 7 1/2" Weight: 4 oz.

Part No. CYF-555
Heavy-duty rugged plier.
Jaw Length: 2 3/4" Total Length: 8 1/4" Weight: 4 1/2 oz.

Part No. CYF-562
Ergonomic pliers with 45 degree bend.
Jaw Length: 3" Total Length: 7" Weight: 2 1/2 oz.

Part No. CYF-563
Medium-duty, spring-opened pliers with offset design.
Jaw Length: 4 1/2" Total Length: 10" Weight: 6 oz Offset: 1 3/4"

Part No. CYF-570
Ergonomic tong with 60 degree bend and two large loops. These tongs can be used in either direction.
Jaw Length: 2 1/2" Total Length: 12 1/8" Weight: 10 oz.

Part No. CYF-571
Heavy-duty straight-handled tongs to handle parts up to 20 oz.
Jaw Length: 3 1/8" Total Length: 10 5/8" Weight: 6 1/2 oz.

Part No. CYF-556
Similar to CYF-551 with vacuum cup.
Jaw Length: 3" Total Length: 7 3/4" Weight: 3 oz.

Part No. CYF-557
Heavy-duty duckbill pliers.
Jaw Length: 2 3/4" Total Length: 8 1/2" Weight: 5 oz.

Part No. CYF-558
Similar to CYF-557 with thumb loop for operator comfort.
Jaw Length: 2 3/4" Total Length: 8 5/8" Weight: 5 1/2 oz.

Part No. CYF-564
Popular long-handled lightweight tongs.
Jaw Length: 3 1/8" Total Length: 11 1/2" Weight: 6 oz.

Part No. CYF-565
Similar to CYF-564 with compression spring.
Jaw Length: 3 1/8" Total Length: 11 1/2" Weight: 6 oz.

Part No. CYF-566
Similar to CYF-564 with vacuum cup.
Jaw Length: 3 1/8" Total Length: 11 3/4" Weight: 6 oz.

Part No. CYF-572
Versatile heavy-duty tongs with thumb loop.
Jaw Length: 3 1/8" Total Length: 10 1/2" Weight: 7 oz.

Part No. CYF-573
Similar to CYF-572 with vacuum cup.
Jaw Length: 3 1/8" Total Length: 10 5/8" Weight: 7 oz.

Part No. CYF-574
Heavy-duty tongs with finger loops on both handles.
Jaw Length: 3" Total Length: 10 5/8" Weight: 8 oz.

Part No. CYF-575
Rugged tongs for heavy parts up to 5 lb.
Jaw Length: 3" Total Length: 12" Weight: 10 oz.

Part No. CYF-576
Similar to CYF-575 with adjustable set screw in jaw for extra gripping power or sheet pulling.
Jaw Length: 3" Total Length: 12" Weight: 10 oz.

Part No. CYF-577
Tong with short 3/4" jaw ruggedly designed for good gripping; gapped 3/16" for thick plate.
Total Length: 10" Weight: 8 1/2 oz.

Part No. CYF-583
Straight-handled tongs.
Jaw Length: 3" Total Length: 12 3/4" Weight: 6 1/2 oz.

Part No. CYF-584
Tongs designed to hold 3 1/2" diameter objects.
Total Length: 14" Weight: 12 oz.

Part No. CYF-585
Stubby-nose tongs with finger loops on both handles.
Jaw Length: 2" Total Length: 12 7/8" Weight 8 oz.

Part No. CYF-592
Stock positioner with screw-driver point. Ideal for removing stuck workpieces from die.
Total Length: 15" Weight: 2 3/4 oz.

Part No. CYF-593
Similar to CYF-592 with 90 degree bend to remove parts from die.
Total Length: 13 3/4" Weight: 2 3/4 oz.

Part No. CYF-594
Tongs designed with an offset jaw; machined to fit 1" taper.
Total Length: 15 1/2" Weight: 13 oz.

Part No. CYF-578
Most versatile of all hand-feeding tools. Will handle up to 10 lb easily.
Jaw Length: 4 3/4" Total Length: 15" Weight: 15 1/2 oz

Part No. CYF-579
Tongs with thin tapered jaw. Extremely light-weight for their size.
Jaw Length: 2 1/4" Total Length: 10 1/2" Weight: 7 1/2 oz

Part No. CYF-586
Extra long lightweight tongs.
Jaw Length: 3" Total Length: 16 1/4" Weight: 8 1/2 oz

Part No. CYF-587
Needle-nose tongs designed to be held in the hand and closed by thumb pressure; ideal for small parts.
Jaw Depth: 2 7/8" Total Length: 14" Weight: 5 oz.

Part No. CYF-588
Similar to CYF-587 with jaw tips formed down 1/2".
Total Length: 13 1/2" Weight: 5 oz.

Part No. CYF-595
Short-jaw tongs with long-handle protection.
Jaw Length: 2" Total Length: 16" Weight: 10 oz.

Part No. CYF-596
Tongs with 3/4" wide jaw. Ideal for gripping thin sheet stock.
Jaw Length: 2 1/4" Total Length: 23" Weight: 21 oz.

Part No. CYF-580
Popular right-angle-jaw tongs for handling flanged or cup-shaped workpieces.
Jaw Length: 5/8" Total Length: 10 1/2" Weight: 9 oz.

Part No. CYF-581
Reverse-angle grip to be held with jaws up or down; ideal for flanges and cupped operations.
Total Length: 10 5/8" Weight: 11 oz.

Part No. CYF-589
Similar to CYF-580 with right-angle pointing up.
Jaw Length: 5/8" Total Length: 15" Weight: 11 oz.

Part No. CYF-590
Designed to pick up 1" bushings.
Total Length: 12 3/4" Weight: 6 1/2 oz .

Part No. CYF-591
Designed to pick up 1 3/4" bushings.
Total Length: 13 1/4" Weight: 6 1/2 oz.

Part No. CYF-597
Tongs designed to hold 1/4" stock. Jaws are spaced 1/4" parallel.
Jaw Length: 3" Total Length: 18" Weight: 15 oz.

Part No. CYF-598
Stubby-nosed tongs.
Jaw Length: 2 1/4" Total Length: 19 7/8" Weight: 18 oz.

Part No. CYF-600
Lightweight tweezers.
Total Length: 6 1/4" Weight: 1 oz.

Part No. CYF-601
Heavier tweezers.
Total Length: 9" Weight: 2 oz.

Ordering Information