Lockouts

Electrical Plug Lockout (Part No. KYM-088) This lockout container can lock out plugs up to 3" wide and 5 1/2" long with a maximum cord diameter of 1 1/4". The lockout consists of a round container and two cover plates made of a durable and chemically resistant thermoplastic. The cover plates, when used singularly or combined, are locked to produce a universally fitting electrical plug lockout device. This lockout is bright yellow so it can also serve as a visual warning to other plant personnel.

Lock-a-Plugs (Part Nos. KYM-984, KYM-987) These lockout devices accommodate a large variety of electrical plugs. The large device (KYM-987) also locks out necked-down pneumatic male fittings commonly attached to compressed air hoses. These devices accommodate up to four padlocks with 9/32" maximum shackle diameter. Part No. KYM-984 is for plugs up to 1 1/2" wide, 1 1/2" high, and 3" long with a maximum cord diameter of 1/2". Part No. KYM-987 is for plugs up to 3 1/2" wide, 3 1/2" high, and 6" long with a maximum cord diameter of 3/4".

Plugout (Part No. KYM-983) This lockout container accepts lockout plugs up to 2 3/4" wide and 4 3/4" long with a maximum cord diameter of 2 3/4". It is constructed of high-impact, yellow UV-stabilized polymer. It has an easy to use two-step close and slide assembly. It allows the use of four individual padlocks (up to 3/8" shackle diameter). A lockout hasp can be used if more locks are required. An advantage to this plug lockout is that it can be stored on the cord when not in use. This device is 4 1/4" wide and 7 1/4" long.

Plug Hugger (Part No. KYM-199) This device is ideal for frequently locked-out cords. It slides over the plug's blades and locks with a key. It can only be used on standard 125-V, 15-A plugs (polarized or nonpolarized) with a hole on both blades.

Lockout Hasps (Part Nos. KYM-988, KYM-989) These lockout hasps are made from 12-gauge steel that is epoxy-coated for superior rust resistance and added dieletric strength. The yellow plastic coating on the lock area is for visibility. These devices accept up to six padlocks with 9/32" maximum shackle diameter. Part No. KYM-988 is a 1" diameter lockout hasp. Part No. KYM-989 is a 1 1/2" diameter lockout hasp.

Electrical Power Cutoff System (Interlock) (Part Nos. KTS-503, KTS-518) This interlock assembly can be interfaced into the control system so when the plug is pulled, the machine or equipment becomes inoperable. It includes a two-prong plug, a 12" (KTS-503) or 24" (KTS-518) chain, a receptacle, and an electrical mounting box. The receptacle and plug are yellow and are made of molded rubber.

Ordering Information