Single-Phase Disconnect Switch and Motor Starters

SINGLE-PHASE DISCONNECT SWITCH AND MAGNETIC MOTOR STARTER
Part No. CSS-055 (115 V, 1/2 HP max.)

This single-phase unit is designed for motors that have built-in over-loads. Typical applications for these combinations include smaller crimping machines, grinders, drill presses, and all types of saws.

The 115-V, 15-A disconnect switch and nonreversing magnetic motor starter are housed in a NEMA-12 enclosure. Enclosure size is 8" x 6" x 3 1/2". It includes a self-latching red emergency-stop palm button and a green motor control start push button. It can be used on machines with 115-V and is rated up to 1/2 HP maximum.

The disconnect switch has a rotary operating handle which is lockable in the off position only. This meets OSHA and ANSI standards.

For machines with 230-V AC single-phase motors, a transformer is required to reduce the control circuit voltage to 115-V AC in order to comply with NFPA 79. Click here to see the CSD series disconnect switches, motor starters, and combinations.

SINGLE-PHASE STARTER WITH SELF-LATCHING EMERGENCY-STOP BUTTON
Part No. CSF-082 (115 V, 1/2 HP max.)

The 115-V, 15-A nonreversing magnetic motor starter, self-latching red emergency-stop palm button, and green motor control start push button are housed in a NEMA 4 polycarbonate enclosure. Enclosure size is 4 1/4" x 4 1/4" x 3 1/2". It can be used for machines with 115-V power and is rated up to 1/2 HP maximum.

For machines with 230-V AC single-phase motors, a transformer is required to reduce the control circuit voltage to 115-V AC in order to comply with NFPA 79. Click here to see the CSD series disconnect switches, motor starters, and combinations.

Part No. CSF-301 (115 V, 2 HP max.)

The 115-V, 30-A nonreversing magnetic motor starter, self-latching red emergency-stop palm button, and green motor control start push button are housed in a NEMA 12 enclosure. Enclosure size is 8" x 6" x 6". It can be used for machines with 115-V power and is rated up to 2 HP maximum.

For machines with 230-V AC single-phase motors, a transformer is required to reduce the control circuit voltage to 115-V AC in order to comply with NFPA 79. Click here to see the CSD series disconnect switches, motor starters, and combinations.

Ordering Information